お客様から返送された製品が安全に到着し、星博電子（Sinpro）にて最も迅速に修理・解析対応を行えるよう、物流手配の前に、スイッチング電源（Switching Power Supply）の梱包、防護および発送に関する以下の規定を必ずご確認いただき、ご協力をお願い申し上げます。

電気安全への意識が世界的に高まる中、現代のスイッチング電源は、単に出力電圧の安定性だけでなく、包括的なハードウェア保護回路が組み込まれているかどうかが重視されています。

Direct current (DC) is an electric current that is unidirectional, providing a constant voltage or current in one direction. Electric current in dry cell, for example, flows from the positive terminal to the negative terminal in a constant direction, but the magnitude may be unstable as time passes, showing different waveforms.

Alternating current (AC) is an electric current that changes direction and magnitude periodically with time, and is presenting in Hertz (Hz), meaning the frequency in cycles per second. The frequency may vary depending on the country. Alternating current can be transmitted effectively with less loss-producing, and can convert the mechanical energy into electrical energy. Through a voltage transformer, the AC voltage can be adjusted; therefore, AC is the type of electric current that is mostly used by electric power companies for transmitting electricity.

1. Get to know the following basic information about the power supply you require: What are the applications, operation temperatures, and product features? Any safety certificates and product testing? How’s the reputation of the manufacturer?

2. Determine the wattage you need: Choose the PSU which has a higher wattage than the device; however, choosing an over higher wattage PSU is not necessary.

3. Choose the PSU with high-efficiency ratings: The ratings are rated under load temperatures, but not room temperatures. The efficiency of ratings will determine the cost of your electricity in the future.

4. Check the robustness of the PSU: The ability to handle changes in current for a PSU should be one of the factors that need to be taken into account. This may not be a criterion, but most of the time the PSU with greater weight represents a larger component (capacitor). 

Looking for a reliable power supply manufacturer?

A power supply, also known as a power supply unit or PSU, is a device that generally converts the alternating current (AC) into low-voltage regulated direct current (DC) power (AC/DC), or converts the direct current (DC) into low-voltage regulated direct current (DC) power (DC/DC) to ensure the electronic components can work properly. Each internal component of an electronic device needs a particular voltage; hence, the PSU can usually provide more than one DC voltage at the same time.

製品品番は三つの英文字＋数字(通常は定格容量当たりの数字)からなっています。

西暦年2桁＋生産週2桁＋シリアル番号6桁

PFD(Power Fail Detector):装置側で電源状況を監視できる機能であり、これから起きる電源の故障を、予告時間ｔにて装置側お知らせする、（一般的には）5VのTTL信号です

単出力：プラス側（Vout）、マイナス側（RTN）
多出力：プラス側（Vo1，Vo2，…）、マイナス側（COM）
COMは共接続点(COMMON)

Class I製品の基盤には、固定用＋アース接続用の螺子穴を設けられ、接地シンボルのあるところが該当します。そこにアース配線をO端子やY端子などで接続してください。

ホットスワップ(活線挿抜)対応電源：装置の動作中に、電源を切らないままに故障した電源ユニットを直接交換することができる電源システムのとこです。